Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Dixon
A new driveway gate in Dixon typically runs $2,400 to $7,800 for a standard steel or aluminum swing gate with operator, while a sliding gate installation lands between $3,200 and $9,500 depending on track work and automation. Most installations in Dixon take one to two days once we have your gate fabricated or sourced. If you’re weighing whether to fix an aging gate or start fresh, call us at (279) 266-8501 and we’ll walk through what makes sense for your property, your driveway, and your budget.
Dixon isn’t just another stop on our schedule. The mix of 1970s-era ranch homes off South First Street, newer subdivisions near Valley Glen Drive, and multi-acre properties east of town means we’re never looking at the same gate twice. Some jobs are simple ornamental iron replacements on a flat driveway. Others involve a warped wood farm gate, a worn concrete wheel track, and an operator that hasn’t been produced since the Clinton administration. We plan for all of it before we arrive.
Why Latch and Post Gate Repair Sacramento Is Dixon’s Preferred Gate Installation Company
Dixon homeowners call us because we show up ready for what’s actually on the property, not a generic punch list. The Cedarwell family name behind Latch and Post has been in the gate business since 2009, and the work that comes through Dixon reflects a specific local reality: older gates on older hardware, plus newer automated systems that need to survive Delta wind and hard summer heat. We make it a point to stock replacement rollers, track sections, hinge plates, and opener parts for the brands Dixon homes actually have, so the first visit usually finishes the job.
Every installation crew that comes to Dixon is background-checked, uniformed, and trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. We lay drop cloths and wear shoe covers inside your home. We clean up before we leave and photograph the cleanup. Cody Beckman, who leads Latch and Post, set the standard years ago: explain the price before the work, respect the family’s time, and leave the property looking like you found it. Those aren’t add-ons. They’re the job.
Dispatch and scheduling for Dixon are coordinated from the brand’s San Francisco Bay Area office. The crews who arrive at your gate are local to this area and know the streets, the soil conditions, and the gate problems that repeat year after year east of downtown.
Styles & brands we work with
Driveway Gate Installation in Dixon
Driveway gate installation in Dixon means working with what the town actually has: ranch homes on wide lots, newer tract homes with ornamental iron, and rural properties where the gate is a real working piece of infrastructure, not decoration. The first sentence of every job is the same: we measure your driveway opening and slope, check your existing posts and footings, and tell you in writing what the new gate will cost before we touch anything.
Replacing an aging swing gate
When a Dixon homeowner has an ornamental iron swing gate from the 1990s with a post that’s leaning into the wind, replacement is usually cheaper than trying to shore up old concrete. We pull the old post, repour a deeper footing sized for Delta wind loads, and hang a new gate that’s balanced for the operator you choose. You’ll see the exact number on paper first.
New gate on an existing driveway
If your driveway already has good concrete and you’re adding a gate for the first time, we look at how the gate will swing or slide without hitting your landscaping or parking area. For Dixon’s bigger front setbacks, a double swing gate often makes the most sense. For tighter lots west of downtown, a single swing or a sliding gate might fit better. Either way, we bring the samples and talk through the options on site.
Sliding Gate Installation in Dixon
Sliding gate installation in Dixon solves a problem that swing gates can’t: driveways that slope, short setbacks, or gates that need to open over a long wheel track. East of downtown, where ornamental iron gates have rolled over the same concrete track for thirty years, the track itself often fails before the gate does. We’ve seen wheel grooves cut an inch and a half deep into the driveway, derailing the gate every few months no matter how many times somebody re-aligns it.
Cantilever slide conversion
When a wheel track is too far gone, the smart fix is a cantilever slide gate, which rides above the ground on rollers mounted to the gate frame itself. No track in the concrete, no more derailments from worn grooves. This is a common upgrade in Dixon’s older east-side neighborhoods, and the price difference between a new tracked slide and a cantilever conversion is often smaller than homeowners expect.
Track replacement for lighter gates
For a newer subdivision home where a lightweight aluminum sliding gate covers a standard double driveway, replacing a bent or worn track section may be all you need. We cut out the damaged track, set a new section in fresh concrete, and get your gate rolling true again. This work on Dixon lots usually runs $900 to $2,400 including track material, concrete, and labor.
Trusted Brands We Service in Dixon
We don’t ask Dixon homeowners to switch brands unless the old equipment isn’t worth saving. Our technicians are factory-trained on LiftMaster, FAAC, and BFT systems, which covers most of what’s installed in Dixon’s 1970s-to-2000s housing stock. We keep common LiftMaster control boards, FAAC gearboxes, and BFT photocell kits in our local parts inventory so a new gate installation in Dixon doesn’t stall while we wait for a backordered part. If your existing operator is on its last legs, we’ll tell you honestly whether it’s smarter to reuse, retrofit, or replace it with something current. Gate Installation is what we do every day, and that includes matching new automation to the operator you already trust.
Common Gate Installation Problems We See in Dixon Homes
- Worn concrete wheel tracks east of downtown: Original tracks from 1990s ornamental iron gates have grooves worn deep into the concrete, causing chronic derailments. The fix that lasts is usually track replacement or a cantilever conversion, not another adjustment.
- Undersized hinge posts on older gates: Many Dixon gates were set on posts that weren’t poured deep enough for Delta wind gusts, and after 25 or 30 years the posts lean and the gate panel sags. We replace the post and footing, then rehang the gate square.
- Legacy operators that can’t meet current safety standards: Older FAAC and LiftMaster swing gate operators from the pre-2005 era often lack modern UL 325 entrapment protection and can’t interface with keypads or loop detectors. Retrofitting safety edges and photocells isn’t always possible, and replacement becomes the honest answer.
- Warped wood gates on rural lots: Dixon’s hot, dry summers pull moisture out of wood farm gates until they twist and bind. If we’re hanging a new automated system on a wood gate, we check for warp and recommend steel reinforcement or replacement so the operator isn’t fighting the gate every cycle.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Dixon, CA
Here’s what we tell Dixon homeowners before they commit: a standard single swing driveway gate with a basic operator typically runs $2,400 to $5,200. A double swing gate starts around $3,800 and lands between $5,500 and $7,800 for ornamental iron with automation. Sliding gate installations in Dixon run $3,200 to $9,500, with cantilever conversions on the higher end because of the fabrication involved. Steel is more affordable than ornamental iron, and aluminum splits the difference. The written quote you get covers every line item: gate, operator, posts, hardware, and labor. If a photoeye, keypad, or loop detector is part of the job, it’s on the quote too. No changes without your sign-off, and the price is locked before work begins. Call Dixon‘s gate installation team at (279) 266-8501 for a free estimate.
We Also Serve Cities Near Dixon
In addition to Dixon, our crews work regularly in Woodland, West Sacramento, Sacramento, and Elk Grove. If you own a rental in one of those cities or just want a second opinion on a gate quote you received, call us at (279) 266-8501. The same written-price promise applies everywhere we go.
Serving Dixon, CA - Our Local Coverage Area
We’re based in the Dixon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Dixon
Not necessarily. The root cause east of downtown is usually a worn wheel track that’s been grooved into the concrete over decades, not the gate itself. We can sometimes solve it with a new track section and rollers, but if the track has failed twice in the last five years, converting to a cantilever slide eliminates the problem permanently. Call (279) 266-8501 and we’ll inspect the track and give you both options in writing.
Yes, in most cases a steel or aluminum chain-link gate on rural Dixon property can handle a solar-powered gate opener, provided the gate frame is straight and the hinges aren’t sagging. We check gate weight, hinge condition, and available sun exposure before recommending a specific opener. Retrofit labor plus a solar-compatible operator typically runs $1,800 to $4,200 in Dixon, depending on gate size and post condition. Estimates are free, so call us and we’ll come look.
If the operator is the only failing component and the gate itself is square and solid, a new LiftMaster operator is often the cheapest fix at $1,600 to $3,400 installed. But if the hinge post is leaning, the gate panel sags, or the operator lacks modern safety features, replacing the full system usually saves money within two or three years compared to patching an aging setup. We’ll show you both numbers before you decide.
Yes, in most of Dixon’s newer subdivisions we can core-drill post footings through clean, existing concrete without removing the whole driveway approach. We cut tidy cores, set the posts, and patch around them neatly. The cost runs about $2,800 to $6,500 for a complete ornamental iron gate and operator, with the concrete work itemized on your written quote.
Delta winds push hard against a closed gate panel, and if the posts aren’t deep enough or the operator isn’t sized for the sail area, the gate will bind or the operator will burn out early. For Dixon installations we spec posts and footings beyond the minimum, and we size operators at least one step above what the gate weight alone would require. It’s not an upsell. It’s what keeps your gate opening every morning for the next twenty years. Call (279) 266-8501 and we’ll put the specifics on paper for your property.
Call Latch and Post Gate Repair Sacramento for Gate Installation in Dixon
If your Dixon gate is leaning, derailing, or just plain worn out, call us at (279) 266-8501. You’ll talk to a live person, day or night. We’ll schedule a time to come look at your gate, measure your driveway, and hand you a written price before any work starts. No pressure, no surprises. Every installation and repair is backed by the 365-Day Done Right Promise: if it’s not right, we make it right. That’s the way Cody Beckman has run Latch and Post since day one, and it’s the way we work in Dixon.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Sacramento, serving Dixon with gate installation, repair, and automation since 2009.