Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Granite Bay, CA
Granite Bay gate work is different from most of the Sacramento area because the homes are larger, the gates are heavier, and the driveways are longer. We handle everything from a sagging wrought iron driveway gate to a dead LiftMaster operator on a five-acre equestrian property. Most jobs start with a call to (279) 266-8501, a written price before any work begins, and a technician who shows up with drop cloths and shoe covers as standard practice.
Why Granite Bay Homes Are Different
Granite Bay’s housing stock skews toward large custom homes and equestrian properties built from the 1980s onward, most sitting on one to five acres. That means gates are often ornate wrought iron or heavy steel, set far back from the road at the end of long, unpaved driveways. The distance alone changes the work: remote controls and keypads need to transmit reliably over 100 feet or more, sometimes through trees and elevation changes that don’t exist in tighter suburban lots.
Folsom Lake’s microclimate adds another layer. Thermal winds off the water push gates against their stops and strain hinges. Sudden temperature drops in fall and winter cause metal contraction, which leads to misalignment and intermittent sensor faults that seem to come and go. Hot, dry summers with intense UV fade finishes and cook electronics inside operators and battery backups. A gate that works fine in April can bind by November. We plan for that when we spec hinges, operators, and backup batteries here.
Styles & brands we work with
Our Main Granite Bay Services
Most Granite Bay homeowners call us for one of three things: a gate that won’t close properly, a full replacement or new installation, or an electric operator that has stopped responding. Each has its own dedicated page.
Gate Repair in Granite Bay
Repair work here usually means welding cracked wrought iron, replacing worn hinges on heavy steel gates, or re-aligning a gate that has shifted with the seasons. We also address latch and lock problems on pedestrian gates and large driveway gates alike. On Granite Bay properties, we’re often working at the end of a long driveway with no power nearby, so we carry portable welding equipment and a full set of replacement parts. Gate Repair in Granite Bay covers what we fix, how long it takes, and what it costs.
Gate Installation in Granite Bay
A new gate in Granite Bay has to match the scale of the property. Many homeowners choose custom steel or wrought iron with heavy-duty posts set in concrete, sized for a gate that might be 14 or 16 feet wide and weigh several hundred pounds. We measure, order, and install with the same upfront written price and cleanup routine as every other job. Gate Installation in Granite Bay explains the process, from post-setting to final adjustment.
Electric Gate Repair in Granite Bay
Electric operators in Granite Bay sit outdoors year-round, exposed to UV, wind, and lake-driven temperature swings. We diagnose intermittent remote signal loss over long driveways, replace failed control boards, and re-set safety sensors that have drifted out of alignment. We’re factory-trained on LiftMaster, FAAC, BFT, and Linear equipment, so the fix is usually done on the first visit. Electric Gate Repair in Granite Bay goes into the common failure points and what a typical repair involves.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Granite Bay
We carry parts and maintain training on the brands Granite Bay gates actually use: LiftMaster, FAAC, BFT, and Linear. Most common parts are on the truck, which keeps same-visit repairs realistic. See our brands for the full picture of what we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Granite Bay, CA
| Service | Typical range in Granite Bay |
|---|---|
| Gate latch replacement | $120 – $240 |
| Hinge replacement (pair) | $180 – $350 |
| Wrought iron weld repair | $150 – $400 |
| Gate re-alignment | $140 – $280 |
| Standard operator replacement | $650 – $1,100 |
| Control board replacement | $350 – $700 |
| Safety sensor replacement | $180 – $320 |
| Keypad installation | $250 – $450 |
| Custom steel gate installation | $3,500 – $8,000+ |
| Full automation package | $2,500 – $6,000 |
Long driveways and heavier custom gates push Granite Bay prices toward the higher end of these ranges, especially when a new operator has to handle a gate that weighs several hundred pounds. Whatever the number, you see it in writing before we touch anything, and the 365-Day Done Right Promise covers every job.
Neighborhoods We Serve in Granite Bay
We work throughout Granite Bay, from lakefront properties near Folsom Lake to the equestrian acreages further east. Our typical response window for the area is same-day or next-day, depending on the time of the call.
- Granite Bay Hills
- Hidden Lakes Estates
- Lakeview Hills
- Equestrian Acres
- Treelake
Service Area – Cities Near Granite Bay
We also cover nearby communities including Roseville, CA, Rocklin, CA, Orangevale, CA, and Loomis, CA.
Serving Granite Bay, CA - Our Local Coverage Area
We’re based in the Granite Bay area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Granite Bay
We typically reach Granite Bay homes the same day you call, or the next morning for evening requests. Calls are answered by a live person 24/7, so you’ll know the schedule before you hang up. Call (279) 266-8501 and we’ll confirm a window right then.
Most repairs and operator replacements don’t require permits. New gate installations with new posts or electrical runs sometimes do, depending on setback and height. We’ll tell you what applies to your property before anything is ordered, and the written quote reflects any permit work.
Yes. We ask before we move or touch anything, and we can schedule most non-urgent work around nap time or school pickup if quiet matters. For jobs inside the home, we use shoe covers, lay drop cloths, and send you a photo of the clean-up before we leave. It’s part of the Cedarwell C.A.R.E. routine on every visit, no extra charge.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Granite Bay Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Installed a new gate motor and remotes. Respectful crew, protected the driveway, and cleaned up every bit of welding debris. Walked me through the new setup patiently."
- Nick Farrow