Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with





See the difference
Before
After
Before
After
Before
AfterAutomatic Gate Repair in Sacramento, CA
Automatic gate repair in Sacramento typically costs $180 to $650 depending on the part that failed, and most jobs are done in a single visit. We focus on the gate opener, the safety sensors, the hinges, and the control board, because those four components account for almost every failure we see. If your gate won’t open, opens halfway, or reverses for no reason, call Latch and Post Gate Repair at (279) 266-8501 and we’ll walk you through what’s most likely happening before we even schedule the truck.
We’re part of the Cedarwell family of independently owned and operated gate specialists, and we’ve worked on automatic gates across Sacramento since 2009. This page covers the specific work of automatic gate repair. If you’re dealing with a swing gate, slide gate, or a latch that won’t catch, start with our broader Gate Repair page and then come back here for the motorized side of things.
When You Need Automatic Gate Repair
Most automatic gate problems announce themselves slowly, then fail at the worst moment. Here’s what Sacramento homeowners call us about most often:
- The gate opens but won’t close all the way. This is usually a safety sensor alignment issue or a limit switch that needs resetting. We see it often after windstorms push gates slightly off their track in neighborhoods like East Sacramento and Land Park.
- The opener hums but the gate doesn’t move. That sound points to a failed capacitor, a stripped gear, or a broken drive chain. Ghost Controls and Mighty Mule units are especially prone to this after Sacramento’s hot summers bake the internal grease.
- The gate reverses before fully closing. Safety sensors near the bottom of the gate get dirty, misaligned, or sun-damaged. In Natomas and Elk Grove, spider webs and irrigation overspray are frequent culprits.
- The remote works only from a few feet away. This is often a failing receiver board or antenna issue, not the remote itself. We test the board before selling you new remotes, which saves families money.
- The gate stopped working entirely after a power outage. Power surges from Sacramento’s summer brownouts can scramble control boards. Sometimes it’s a simple reset. Sometimes the board needs replacement.
- The gate is slow or jerky mid-travel. Worn rollers, dry bearings, or a failing gearbox. If ignored, these put strain on the motor and shorten its life by years.
If any of these sound familiar, a trained technician should look at the gate. Automatic gates carry serious weight and tension. A cable that snaps or a spring under load can injure someone. We never advise homeowners to open the motor housing or adjust the arm themselves. Call us instead at (279) 266-8501, and a live person will answer, day or night.
Our Automatic Gate Repair Process
Every automatic gate repair follows the same careful routine. No shortcuts, no surprises.
- We ask what the gate is doing. On the phone, we’ll ask specific questions: what brand is the opener, does it hum, does it move at all, when did it start. That helps us bring the right parts on the first trip. We’re factory-trained on LiftMaster, DoorKing, and Elite, among others, so we know what to listen for.
- We diagnose on site before touching anything. Our technician checks the opener, sensors, hinges, and control board. Then we explain what we found in plain language, including what can wait and what can’t. You get a written price for the full repair before any work begins. No verbal estimates that drift later.
- We protect your property while we work. If the control box is inside your garage or on a wall near your front entry, we put on shoe covers and lay drop cloths before stepping inside. We choose pet-safe lubricants where there’s a choice, and if your kids are napping, we can work with quiet hand tools instead of impact drivers.
- We repair or replace the failed part. That might be a new safety sensor pair for an Elite gate, a replacement gear for a LiftMaster opener, or a reprogrammed receiver board for a DoorKing system. We carry common parts on the truck, which means most Sacramento repairs finish the same day.
- We test the full cycle at least three times. Open, close, reverse. We also test the safety sensors and the manual release. A gate that works once isn’t fixed. A gate that works repeatedly, including the safety stop, is fixed.
- We show you the clean-up before we leave. The technician takes a photo of the work area after we’ve cleaned up, and you can see it before we pull out of the driveway. That’s part of the Cedarwell C.A.R.E. routine on every visit: Clean up like it’s our own home, Ask before moving anything, Respect your quiet hours, and Explain the price before the work.
Every repair is covered by the 365-Day Done Right Promise. If something isn’t right within a year of the repair, we come back and make it right. No argument, no fine print.
Automatic Gate Repair Pricing in Sacramento
Here’s what automatic gate repair typically costs in Sacramento, CA. These are honest ranges based on what we’ve charged for similar jobs across the city, from Curtis Park to Folsom to Roseville. You’ll see your exact number in writing before we touch anything.
| Repair Type | Typical Range | What Affects Price |
|---|---|---|
| Safety sensor replacement or realignment | $120 – $240 | Sensor brand, wiring condition, post mounting |
| Remote or receiver programming | $95 – $180 | Number of remotes, security code type |
| Gear, chain, or belt replacement | $220 – $420 | Opener brand, motor access, part availability |
| Control board replacement | $260 – $550 | Board model, single vs. swing gate configuration |
| Hinge or roller replacement | $150 – $350 | Gate weight, number of hinges, post condition |
| Full opener replacement (motor + arm) | $650 – $1,400 | Brand, gate length, solar vs. wired power |
Several things affect the final price in Sacramento. Older gates with rusted post brackets take longer to work free. Gates on slopes, like many in the Foothill Farms area, need more gate realignment to stay balanced. And gates exposed to full afternoon sun heat up the motor housing, which sometimes means additional ventilation work to prevent future failures.
Every estimate is free, and the written price we give you is the price you pay. If the repair requires a part we don’t have on the truck, we’ll tell you the total including the part before ordering anything. Call (279) 266-8501 for an exact quote on your gate.
Why Sacramento Families Call Latch and Post
Automatic gates sit at the front of your property. They’re the first thing your kids walk past on the way to school and the last thing your dog noses at before bed. We treat the job with that in mind.
Every gate comes down to two parts, the latch that holds it and the post that carries it. That’s the work we focus on. We don’t do roofing or plumbing or window screens. We fix gates and the equipment that moves them. That narrow focus means our technicians have seen your specific failure before, likely dozens of times.
Our background-checked, uniformed technicians follow C.A.R.E. on every visit. We ask before we move a bicycle, a hose reel, or a potted plant. We keep our tools quiet when a baby is sleeping. We lay drop cloths on the floor of your garage and put on shoe covers before stepping inside. Your floors stay clean and you get a photo of the clean-up before we leave.
And when you call, a real person answers. Not a phone tree. Not a call-back service. A person. At 2 p.m. on a Tuesday or 2 a.m. on a holiday, someone who knows gates will pick up the phone. That matters when your gate is stuck open at night and your dog decides the front yard is now his.
FAQs – Automatic Gate Repair
How much does automatic gate repair cost in Sacramento?
Automatic gate repair in Sacramento typically runs between $180 and $650, with simple sensor issues on the lower end and control board replacements on the higher end. Full opener replacement can reach $1,400 for larger swing gates. The exact price depends on the part that failed and the brand of opener you own, and you’ll get a written quote before any work begins. Call (279) 266-8501 for a free estimate.
Can you repair my automatic gate the same day in Sacramento?
In most cases, yes. Common failures like sensor misalignment, remote programming, and gear replacements are jobs we finish in one visit because we carry parts for LiftMaster, DoorKing, Elite, and Mighty Mule on the truck. If your gate needs a part we don’t have, we’ll tell you before ordering anything and schedule the follow-up at no additional trip charge. Call (279) 266-8501 and we’ll tell you honestly whether same-day is realistic for your specific gate.
Is it cheaper to repair or replace my automatic gate opener?
If your opener is under 10 years old and the failure is a gear, sensor, or receiver board, repair is almost always cheaper, usually $180 to $550. Once the motor itself fails or the opener is over 12 years old, replacement often makes more financial sense, since a new opener comes with a fresh warranty and newer safety features. We’ll give you both numbers in writing and let you choose, with no pressure either way. Call (279) 266-8501 for an honest comparison on your specific gate.
Do you work on all automatic gate brands in Sacramento?
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers across the Sacramento area. Our technicians are factory-trained on each brand, which means we diagnose and repair correctly the first time instead of swapping parts until something works. If you have an opener outside this list, call (279) 266-8501 and we’ll tell you straight if we can help.
Automatic Gate Repair Near You in Sacramento
We work across home neighborhoods throughout the Sacramento area from Midtown and East Sacramento to Natomas, Land Park, Pocket, Greenhaven, Elk Grove, and Folsom. Automatic gates fail differently depending on where you live. Mature tree roots in Land Park shift gate posts. Summer heat in Natomas bakes control boards. Wind along the river in Pocket pushes gates out of alignment. We know these patterns and we bring parts that match.
If your automatic gate is acting up, don’t guess. Call us at (279) 266-8501 and describe what it’s doing. A live person will answer and help you figure out the next step. Every repair starts with a free estimate, a written price, and no pressure to accept. We’ll protect your floors, respect your quiet hours, and show you the clean-up before we go.
For an overview of all the gate services we offer, including non-motorized Gate Repair in Sacramento, visit our main service page.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Sacramento, serving Sacramento.