Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Elk Grove, CA | Latch and Post Gate Repair Sacramento
We repair Ghost Controls automatic gate openers every week across Elk Grove, and the short answer is this: if your AXDP, AXS, or TSS1 isn’t running right, we can usually fix it same day with OEM-compatible parts already on the truck. For Gate Repair in Elk Grove, that means fast local service. What makes Ghost Controls work in Elk Grove different from Roseville or Citrus Heights is the HOA factor. Many subdivisions here, especially the newer ones east of Highway 99, require community-approved remotes, receiver modules, and even specific antenna colors. We stock those exact variants so your gate doesn’t earn you a letter from the management company. Call (279) 266-8501 for a free estimate, and you’ll get a written price before anything gets touched.
Why Elk Grove Residents Choose Us for Ghost Controls Service
We’re the Ghost Controls sales & service team that reads the fine print on HOA gate specs before we show up. Cody Beckman grew up in the San Fernando Valley and learned gate systems the hard way, years of diagnosing residential and commercial openers across Southern California before bringing that steady approach to Sacramento and Elk Grove. If a $40 circuit board repair fixes your opener, that’s what we quote. We don’t pitch a full replacement because it’s easier for us.
Every tech on our Elk Grove runs carries new old stock or verified Ghost Controls boards, OEM-compatible remotes, gear sets, and photo-eyes for the AXDP, AXS, TSS1, and AXXP lines. We’re an independent service provider, not a Ghost Controls authorized dealer. That independence means we answer to you, not a manufacturer’s parts quota. It also means we’ll tell you honestly when a legacy opener costs more to repair than replace, and show you the math in writing. In those cases, we may recommend our Gate Installation in Elk Grove instead.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Elk Grove
- Control board failure after summer brownouts. Elk Grove’s long, hot summers stress the local grid, and Ghost Controls boards don’t always survive voltage dips. A clicking board with no motor response often has a blown MOSFET, which we can replace at board level instead of ordering a whole new controller.
- Plastic gear stripping in AXDP and AXS openers. Years of Central Valley UV exposure soften the spur gears inside these openers. The teeth shear off under load, and the arm stops mid-travel. We replace the gear set with factory-spec components, not aftermarket plastic that’ll fail again in two summers.
- Photo-eye misalignment from shifting fence posts. Elk Grove’s clay soil expands and contracts with winter frost and summer drought. Gate pillars move, photo-eyes drift, and the gate refuses to close or reverses at random. We realign the eyes and shim the mounts so they stay put through the next wet season.
- Remote range loss on large lots. Many Elk Grove properties in Laguna West and East Franklin sit on deeper lots than older Sacramento neighborhoods. The stock Ghost Controls receivers are under-powered for that distance. We upgrade to compatible receiver modules with better sensitivity and check antenna routing before you buy new remotes.
- Solar panel degradation on TSS1 openers. Elk Grove’s UV is rough on the small solar panels that keep TSS1 batteries topped off. A panel that looks clean can be producing a fraction of its rated output. We test actual charging current, not just voltage, because that’s where solar gate openers fool people.
Ghost Controls Service in Elk Grove: What Local Conditions Mean for Your Equipment
Because many Elk Grove HOAs require matching Ghost Controls remotes and antenna colors, we stock the exact Ghost Controls receiver modules and HOA-approved transmitters used in neighborhoods like Laguna West and East Franklin. Your gate matches your neighbors, and the management company doesn’t send you a violation notice a week after we leave. That’s a detail most repair companies miss until their customer calls back angry. We also see a pattern in the East Franklin subdivision off Elk Grove Boulevard specifically: homeowners there deal with dual problems after heat waves, a dead gate arm paired with a clicking control board. We carry the reconditioned boards, factory-spec gear sets, and pillar-mount photo-eye hardware needed to resolve both issues in one visit. This is what makes our Elk Grove service area coverage genuinely local, not just a zip code on a dispatch map. The soil shifts the posts, the sun cooks the plastic, and the HOA polices the details. We plan for all three.
Ghost Controls Models & Products We Service in Elk Grove
We work on the full Ghost Controls lineup without needing manufacturer authorization. That includes the AXDP dual-gate opener kit, the AXS single-gate opener, the TSS1 solar gate opener, and the AXXP high-torque opener for heavier gates. Most Elk Grove driveways we see run AXDP or AXS units paired with ornamental steel or aluminum gates, and the TSS1 shows up on ranchette properties where running conduit to the gate wasn’t practical when the house was built. We keep OEM-compatible arms, receiver modules, and new old stock boards ready for local turnaround. If a legacy TSS1 or AXXP repair lands above 60% of a new opener’s cost, we tell you before you spend a dollar, with the numbers side by side in writing.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Elk Grove
The estimate itself costs you nothing. A service call to diagnose a Ghost Controls opener in Elk Grove typically starts around $95 to $120, and the final price depends on what we find. Board-level repair, like a blown MOSFET replacement, usually lands between $150 and $280. A full gear set for an AXDP or AXS runs $120 to $240 in parts. Photo-eye realignment with pillar shims is usually under $100 as part of a service visit. A new OEM-compatible Ghost Controls receiver module runs $80 to $150 installed. You’ll see the exact number in writing before any work begins, and the price doesn’t change unless you approve a change. Call (279) 266-8501 for a quote that matches your gate, your HOA’s rules, and your opener’s actual condition.
Serving Elk Grove, CA - Our Local Coverage Area
We’re based in the Elk Grove area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Elk Grove
Can you repair my Ghost Controls solar-powered gate opener even if the panel looks fine? Yes. A solar panel that passes a visual check can still be producing too little current to keep the TSS1 battery charged, especially after several Elk Grove summers of UV exposure. We test actual charging current under load, something most multimeter checks miss. Call (279) 266-8501 and we’ll test yours, free estimate included.
Why does my Ghost Controls remote only work within 10 feet in Elk Grove? Usually the receiver is under-powered for the lot depth, or the antenna is routed too close to steel framing or stucco lath. Homes in Laguna West and East Franklin sit on deeper lots than most Sacramento properties, and stock Ghost Controls receivers don’t reach well across that distance. We upgrade to compatible higher-sensitivity receiver modules.
My HOA says I need a Ghost Controls remote that matches the community standard. Do you stock that in Elk Grove? We stock the exact Ghost Controls receiver modules and HOA-approved transmitters used in Laguna West and East Franklin, including the matched antenna colors. That’s the whole point of doing this work locally instead of guessing. Call (279) 266-8501 and tell us your subdivision name, we’ll confirm the right unit.
The control board on my Ghost Controls AXDP smells burnt and the gate won’t open. Can it be fixed, or should I replace the whole opener? Usually it can be fixed. A burnt smell on an AXDP board typically means a blown MOSFET or voltage regulator, which we replace at board level for $150 to $280. Only when the repair exceeds 60% of a new opener’s cost do we recommend replacement, and we show you the math first.
My Ghost Controls gate is sagging and dragging on the pavement. Is that an opener problem? Often it’s a post problem, not an opener problem. Elk Grove’s clay soil shifts with winter frost and summer drought, which moves the hinge post and hangs the gate low. We correct the post and hinge geometry first, then check whether the opener’s gear set took damage from running against that resistance. Call (279) 266-8501 for a full diagnosis.
Service Areas Near Elk Grove
We serve Elk Grove and the surrounding communities, including Sacramento, Roseville, Citrus Heights, Rancho Cordova, and Carmichael. If you’re north of Elk Grove, see our Ghost Controls service in Sacramento page. Up the I-80 corridor, our Ghost Controls service in Roseville page covers Placer County gates. For Elk Grove calls, the crew leaves from our local dispatch and we’re usually at your gate within the hour.
Book Your Ghost Controls Service in Elk Grove Today
One call gets you a live person, a written price, and a tech who knows Ghost Controls without needing a manual open. We’ll diagnose your opener, fix what’s actually broken, and leave before you notice we were there. Call (279) 266-8501 for a free estimate. A gate that works quietly is one you stop thinking about, and that’s exactly where we want to leave yours.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Sacramento, serving Elk Grove since 2009.