Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Sacramento?
Gate Installation services in Sacramento typically cost between $1,800 and $6,500 for most residential projects in 2026, with the average homeowner spending about $3,400. A basic single-swing steel gate on existing posts runs $1,200 to $2,800, while a custom driveway gate with an electric opener and intercom lands between $4,500 and $9,000. Those numbers include materials, labor, and concrete footings, but the exact figure depends on gate size, material choice, and whether you need new posts poured.
Gate Installation Cost Breakdown (2026)
Here’s what Sacramento homeowners are actually paying this year, broken down by component. These figures come from jobs we’ve quoted across the metro area, from Land Park to Roseville and Elk Grove.
| Cost Component | Price Range (Sacramento, 2026) |
|---|---|
| Pedestrian gate (wood, 4 ft wide) | $350 – $900 installed |
| Pedestrian gate (wrought iron/steel, 4 ft wide) | $600 – $1,400 installed |
| Single driveway gate (steel, 10-12 ft) | $1,800 – $3,800 installed |
| Double driveway gate (steel, 14-18 ft total) | $3,200 – $6,800 installed |
| Custom wood driveway gate (cedar or redwood, 12 ft) | $2,900 – $5,500 installed |
| Electric gate opener (LiftMaster, FAAC, or BFT) | $1,500 – $2,800 including installation |
| Intercom or keypad entry system | $450 – $1,200 installed |
| New gate posts (steel, set in concrete) | $600 – $1,500 per post |
| Concrete footing work | $250 – $700 per footing |
| Old gate removal and haul-away | $150 – $400 |
| Permit (City of Sacramento or county) | $80 – $250 |
The spread between low and high comes down to three things: what’s already in the ground, what the gate is made of, and how much of the system you want automated. A gate hung on sturdy existing posts with no opener is a two-hour job. A double swing gate with new posts, a LiftMaster opener, and a keypad is a full day or more.
In Sacramento, most older homes in East Sacramento and Tahoe Park were built with wood fence lines and 4×4 posts that aren’t rated to carry a heavy steel gate. That means about half the gates we quote need new posts, and that’s the single biggest swing factor in your final price. We always give you the written number before any work starts, so there’s no surprise when the crew breaks ground.
What Affects Gate Installation Pricing in Sacramento
Sacramento has a few quirks that shape pricing differently than, say, Phoenix or Portland. Here’s what actually moves the needle:
- Gate width and weight. A 10-foot single gate is lighter and cheaper than a 16-foot double. Beyond about 14 feet, you generally need two panels and a center post, which adds material and labor.
- Existing posts and footings. In older Sacramento neighborhoods like Curtis Park and Colonial Heights, wood fence posts from the 1970s are common, and they aren’t built to hold a 400-pound steel gate. Replacing them with steel posts set in concrete is often non-negotiable for safety.
- Material choice. Pressure-treated pine is the budget option. Cedar and redwood cost more but hold up better in Sacramento’s dry summers. Steel and wrought iron last longest but run 30 to 50 percent higher on material.
- Automation package. An electric opener from LiftMaster, FAAC, or BFT adds hardware cost plus electrical wiring. If there’s no outlet near the gate, running a dedicated circuit from the panel adds $400 to $900.
- Soil type. Much of Sacramento sits on clay-heavy soil that shrinks and swells with the seasons. We pour deeper footings here than in coastal areas, typically 30 to 36 inches, which adds concrete and labor compared to a 24-inch footing in sandy soil.
- Permit requirements. The City of Sacramento requires a permit for driveway gates that exceed 7 feet in height or include an automatic opener. The county has similar rules for unincorporated areas like Antelope and Vineyard. Permit fees are modest, but the inspection adds time to the project.
How Much Does a Gate Opener Add to Installation Cost?
Adding an electric opener to your gate installation in Sacramento runs $1,500 to $2,800 on top of the gate itself. That includes the opener unit, mounting hardware, safety sensors, and a day of technician time for wiring and programming.
We install and program LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers. Each has a different feel. FAAC and BFT are common on hydraulic and underground systems. LiftMaster and DoorKing dominate residential Sacramento driveways because parts are readily available and they handle the Sacramento Valley heat without overheating. Ghost Controls is popular for solar-powered rural gates in places like Wilton and Sloughhouse where running power to the gate costs more than the opener itself.
If you have kids or pets, plan on adding safety sensors, often called photo eyes, which are required on any automatic gate. They run $150 to $350 installed and stop the gate if something crosses its path. We will always recommend them on a gate that serves a house with small children, and we will explain exactly why before adding a dollar to your quote.
How to Save on Gate Installation
Saving money on a gate usually means making smart material choices up front, not cutting corners on the foundation. Here are honest ways to keep a Sacramento gate installation affordable:
- Reuse structurally sound posts. If your existing steel posts are plumb and set in solid concrete, we can hang a new gate on them and save you $600 to $1,500. We’ll tell you straight if they’re not up to the job.
- Choose pressure-treated pine for pedestrian gates. For side-yard gates that don’t carry the visual weight of a driveway entrance, pine costs a third of cedar and will last 12 to 15 years with stain.
- Skip the automation on day one. A manual steel driveway gate is $1,800 to $3,800. You can add a LiftMaster opener later. Just tell us during installation so we can bury conduit and leave wiring access, which costs about $150 now and saves $500 in retrofit labor later.
- Bundle the gate install with fence repair. If the adjacent fence line needs work anyway, doing both in one visit saves a mobilization fee and lets the crew work more efficiently.
- Ask for a written quote before anything starts. Every Latch & Post visit includes a written price up front. Call (279) 266-8501 for a free estimate, and you’ll know your number before the first hole is dug.
How the Installation Process Works
Here is the sequence we follow on every gate installation in Sacramento, from first call to final walkthrough. We’ve refined this routine since Latch & Post opened in 2009 as part of the Cedarwell family of independently owned and operated gate specialists.
- Site visit and measure. We measure the opening, check existing posts and footings, test soil conditions, and look for obstacles like sprinkler lines or low-voltage lighting. We also check for gas lines before any digging, because post holes in Sacramento yards sometimes cross buried utility runs.
- Written price before work begins. Before we touch anything, you get a printed quote with the gate, posts, hardware, opener (if included), and labor broken out line by line. No pressure, no verbal estimates that change later.
- Post removal and new footings. If new posts are needed, we remove the old ones, dig 30 to 36 inch holes, set steel posts in concrete, and let it cure. This is typically a two-day process before the gate goes on.
- Gate fabrication or delivery. Custom steel gates are fabricated off-site and delivered ready to hang. Wood gates are built on-site so we can match your fence line grain and height exactly.
- Hang, level, and adjust. We hang the gate, shim the hinges for smooth swing, and adjust the latch so it closes without slamming. In Sacramento’s clay soil, we set gates with a touch more clearance at the base, because the ground moves more here than most people expect.
- Automation wiring and programming. If you’re adding an opener, we run conduit, mount the opener, wire the safety sensors, and program remotes and keypads. We walk you through everything before we leave, and we give you a quiet-close setting option if nap time matters at your house.
- Cleanup and photo. We lay drop cloths on the floor and put on shoe covers before stepping inside for any part of the job. Before we leave, we take a photo of the clean work area and show it to you. Clean up like it’s our own home, ask before we move anything, respect your family’s time and quiet hours, explain the price before the work. Those are the Cedarwell C.A.R.E. values, and they’re built into every visit.
Every installation is covered by our 365-Day Done Right Promise. If the gate doesn’t swing right, the opener doesn’t respond the way it should, or anything about the install isn’t right, Latch & Post makes it right. No argument, no fine print.
Can You Install a Gate Yourself?
You can hang a light wooden Pedestrian Gate on existing posts with basic tools and a helper. But a driveway gate, especially a steel one with an opener, is not a weekend project.
The dangerous part isn’t obvious until you’re in the middle of it. A 12-foot steel gate panel weighs 350 to 450 pounds. If it slips while you’re setting hinges or adjusting bolt positions, it can crush a hand or pin someone against the post. Electric openers add another layer: they run on 120-volt circuits in most Sacramento homes, and a miswired connection is a shock and fire hazard. We recommend a trained professional for any gate over 6 feet wide or over 150 pounds, and for anything with an automatic opener. Factory-trained technicians who install these systems every week know where the pinch points are and how to rig the gate safely.
Sacramento Neighborhoods We Install Gates In
We work across the Sacramento metro. Each neighborhood has its own style, and the gate that fits a ranch house in Fair Oaks looks different from what works on a Victorian in Midtown.
- East Sacramento and Midtown: Wood gates matching the bungalow and craftsman aesthetic, often cedar with black iron hardware. Many homes here have narrow side yards, so pedestrian gates are the most common request.
- Land Park and Curtis Park: Mature trees and older fences mean we’re often replacing posts and matching the existing fence grain. Wrought iron driveway gates are popular here.
- Natomas and North Natomas: Newer construction with HOA requirements. Many HOAs have gate height and color restrictions, and we’ll help you prep a submittal if your association requires one.
- Elk Grove and Wilton: Larger lots and rural driveways. Solar-powered Ghost Controls openers and wider double gates are the norm. In Wilton, we see a lot of sandy loam that drains fast but needs wider footings for stability.
- Roseville and Rocklin: Newer developments with stucco walls and metal gates. We match powder-coat finishes on steel to the existing wall cap color.
- Orangevale and Fair Oaks: Half-acre to one-acre properties, many with horses or livestock. We install gates with spring-loaded latches and no bottom rail gaps that could catch a hoof or trap a small dog.
Wherever you are in the Sacramento area, the process is the same: measure, quote in writing, install carefully, clean up. To see what’s involved in a typical project, read our guide to Gate Installation in Sacramento.
FAQs – Gate Installation Cost
How much does a basic driveway gate cost in Sacramento?
A basic single steel Driveway Gate in Sacramento runs $1,800 to $3,800 installed, including posts and concrete footings. The national average sits closer to $2,500, but Sacramento’s clay soil often requires deeper footings and stronger post anchoring, which pushes some jobs toward the higher end. Call (279) 266-8501 for an exact quote, estimates are free.
Is it cheaper to repair or replace a gate?
Most gate repairs run $150 to $600, so fixing is almost always cheaper than replacing, which starts around $1,800. If the gate frame is rusted through or the posts are leaning, replacement makes more sense than repeated repairs. We’ll give you an honest read, and a written price for either path, before any work begins.
How much does an electric gate cost in Sacramento?
An electric driveway gate in Sacramento runs $3,500 to $8,500 all-in, including the gate, opener, wiring, safety sensors, and installation. The opener itself adds $1,500 to $2,800. We stock and install LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so the opener you already own or want can be serviced on the first visit.
Do I need a permit for a gate in Sacramento?
You need a permit in the City of Sacramento if your gate exceeds 7 feet in height or includes an automatic opener, and permit fees run $80 to $250. Sacramento County requires similar permits for unincorporated areas. We’ll tell you during the quote whether your project needs one, and we handle the paperwork as part of the installation.
How long does gate installation take?
A simple pedestrian gate on existing posts takes 2 to 3 hours. A full driveway gate with new posts, concrete footings, and an electric opener takes 1 to 2 days, including concrete cure time. Sacramento’s warm, dry summers help concrete cure faster than coastal climates, so we can often finish a full install in a single day if we pour footings in the morning and set the gate late afternoon. Call (279) 266-8501 and we’ll give you a timeline for your specific project.
Get a Free Gate Installation Estimate in Sacramento
Every gate comes down to two parts, the latch that holds it and the post that carries it. That’s the job we focus on, and it’s all we do. Latch & Post Gate Repair is part of the Cedarwell family, operating in Sacramento since 2009, and led by Cody Beckman. When you call, a live person answers, 24 hours a day, 7 days a week, nights, weekends, and holidays included. We’ll schedule a visit, give you a written price before any work starts, and treat your home the way we’d want ours treated. Shoe covers on, drop cloths down, cleanup photo before we leave. Reach us at (279) 266-8501 for a free estimate, or visit our home page to learn more about the Cedarwell Care Promise and the 365-Day Done Right Promise.
Pricing reflects the Sacramento market as of 2026. Latch and Post Gate Repair Sacramento offers free estimates – call (279) 266-8501.
Written by Cody Beckman, Owner at Latch and Post Gate Repair, serving Sacramento since 2009.
What Our Customers Say
"Electric gate was sticking. He oiled and adjusted the track, wiped everything down after, and left no grease anywhere. Quiet, kind, and quick."
- Carlene Fuchs"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"Careful and considerate from start to finish. Our kids were playing in the yard and the crew was mindful of them the whole time. Gate opens like new and the area was spotless after."
- Marcus Teague