Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Folsom
A new driveway or pedestrian gate in Folsom typically runs $2,800 to $7,500 installed, depending on the gate style, opener package, and what the soil and existing posts require. Most standard single swing gate installations in Folsom land between $3,200 and $4,800, with slide gates on hillside lots running higher due to the track and cantilever work. We’re Latch and Post Gate Repair, part of the Cedarwell family, and gate installation is what we do. Not as a side trade. That’s the whole job. Call (279) 266-8501 for a written, no-pressure quote before any work begins. We answer live, around the clock, and we know Folsom’s gates, soils, and subdivisions better than anyone who has to drive in from outside the area.
Why Latch and Post Gate Repair Sacramento Is Folsom’s Preferred Gate Installation Company
Folsom homeowners know what a racked gate feels like. You lift the latch, the gate drags across the concrete, and the hinge post leans three or four degrees off plumb. By the time it gets that bad, shims and hinge adjustments don’t hold. What fixes it is cutting the old hinge brackets off, re-welding them to a laser-leveled line, and often replacing the post entirely. That’s standard work for us in Folsom, and it’s the reason our Gate Installation team keeps a welding rig and post-hole equipment on the trucks that serve this area.
Homeowners in Empire Ranch, American River Canyon, and the older streets near Sutter Street call us because we explain the soil problem before we quote the gate. Folsom sits on expansive clay that swells with winter rain and shrinks through 100°F summers. Any gate hung on a shallow footing is going to move. We don’t pretend otherwise, and we don’t sell a gate that ignores it.
Styles & brands we work with
Gate Installation Services in Folsom
Gate Installation Services in Folsom start with a free on-site measure. We check the hinge posts, the footing depth, the slope of the drive, and whether the old gate can be salvaged or should be retired. A typical ornamental steel driveway gate on a standard 10-foot Folsom drive replaces for $3,200 to $4,800, including welded hinge brackets, a powder-coated finish, and a post set that will actually hold through wet winters. We provide a written price before any work starts, and we don’t start until you approve it.
Driveway and Double Gate Replacement
Double gates on Folsom’s wider drives need matched leaves that meet cleanly in the center. When one original gate has sagged and the other hasn’t, hanging a new single leaf often makes the mismatch worse. We measure both openings, correct the post lean, and hang the pair so the latch aligns without a fight.
Pedestrian and Security Gates
Pedestrian gates on side yards and RV access points are the ones Folsom homeowners use most, so they take the most abuse. We install self-closing hinges and adjustable latches that hold alignment even after the clay moves. For rear-yard security gates, we can add keypad access and keep the install clean enough that your fence line looks untouched.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Folsom
Electric Gate Installation in Folsom means pairing the right operator with the right track or swing hardware, then wiring it so it doesn’t fault every time the soil shifts. A swing gate opener retrofit runs $1,600 to $3,400 on top of the gate itself. A full slide gate operator with cantilever track on a hillside lot runs $3,800 to $6,900 installed. We quote the whole job, including the power run, the safety edges, and the loop detector, in writing before we cut anything.
Operators, Loop Detectors, and Safety Edges
A gate operator in Folsom lives outdoors through 100°F heat and winter rain, so we mount them in ventilated enclosures and seal every conduit entry. Loop detectors cut into the driveway read vehicle presence and keep the gate from closing on a car. Safety photocells and reversing edges are not optional here. We wire them on every install and test them with the gate under full load.
Solar Openers for Hillside Drives
On hillside lots in American River Canyon where trenching power to the gate would mean cutting through rock or retaining walls, a solar opener often makes more sense. We use Mighty Mule and LiftMaster solar packages with panel mounts angled for Folsom’s sun, and we size the battery for winter overcast. No generator noise, no $4,000 trench. It’s not the right choice for every lot, but for the right one it’s the cleanest answer.
Trusted Brands We Service in Folsom
We’re factory-trained on the operators Folsom homeowners actually have bolted to their gates: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If a Gate Installation in Folsom customer already has an Elite or DoorKing operator that’s still solid, we’ll build the new gate around it and save you the cost of replacing good equipment. We keep common control boards, limit switches, and safety-edge parts stocked locally, which means less waiting when a board fails on a Saturday. And every call to (279) 266-8501 is answered by a live person. No voicemail queue, no callback later.
Common Gate Installation Problems We See in Folsom Homes
- Hinge-post lean on expansive clay. Original footings on 1990s Folsom tract homes are often only 18 to 24 inches deep with no rebar cage. Clay expansion lifts them unevenly until the post tilts 3 to 5 degrees and the gate drags. The fix is a new footing below the movement zone plus cut-and-re-weld hinge brackets. Shims won’t hold.
- Sprinkler overspray corrosion at the post-to-gate connection. In wildland-urban interface communities, lawn sprinklers soak the base of the hinge post every morning. Steel tube gates corrode right where the bracket welds to the post, the post softens, and the gate sags until the photocell beam is blocked. We replace the post, relocate or adjust the sprinkler head, and coat the connection.
- Slide gates binding on hillside tracks. Rack and pinion slide gates on American River Canyon lots bind when the track was laid without accounting for lateral soil creep. The gate jumps teeth and the operator burns out. We install cantilever-style slide tracks that ride above the soil instead of on it.
- Shared driveway access that can’t stop working. Many Folsom homes share a gate with a neighbor or have only one vehicle entrance. We stage the removal and install so the drive is never blocked overnight, and we keep a temporary chain and lock ready if the job runs into evening.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Folsom, CA
Here’s what gates actually cost in Folsom right now. A standard 10-foot ornamental steel swing gate, single leaf, installed with new hinge brackets and a powder-coated finish: $3,200 to $4,800. A double gate on a 16 to 18-foot drive: $5,500 to $7,900. A pedestrian gate with self-closing hinges: $900 to $1,800. Slide gate with cantilever track: $4,200 to $7,500 depending on hillside work and retaining wall conditions. Operator retrofit on an existing gate: $1,600 to $3,400. These are installed prices, quoted in writing before any work starts. No percentages added later, no change order games.
Call (279) 266-8501 for an exact quote. The estimate is free, and the number we show you is the number you pay.
We Also Serve Cities Near Folsom
Our crews serve Folsom and the surrounding communities: Folsom, Orangevale, Granite Bay, Fair Oaks, and Roseville. If you’re a few blocks outside the Folsom line in one of those areas, call anyway. The dispatch schedule is planned around Folsom jobs, and we’ll tell you honestly when we can get there.
Serving Folsom, CA - Our Local Coverage Area
We’re based in the Folsom area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Folsom
The gate panel is usually fine. What fails is the hinge post and its footing. Folsom’s expansive clay swells in winter rain and shrinks in summer heat, and the original footings on 1990s tract gates were too shallow to resist that movement. The post tilts 3 to 5 degrees out of plumb, the gate drags, and any hinge adjustment just gets eaten next season. The real fix is a new post footing below the movement zone plus re-welded hinge brackets to a plumb line. That’s the repair we do most in Empire Ranch and American River Canyon. Call (279) 266-8501 and we’ll tell you if your post is salvageable before you spend money on a new gate.
Yes, and on steep Folsom lots it’s often the better choice. A swing gate needs a clear arc to open, and on a sloped drive that arc either hits the hill or leaves a gap at the bottom. A slide gate runs along the fence line instead. On hillsides we use a cantilever track that rides above the soil rather than a rack and pinion track that binds when the ground creeps. The gate won’t jump teeth and the operator won’t burn out. Expect to pay $4,200 to $7,500 for the full slide setup on a Folsom hillside lot.
A loop detector is a wire loop cut into the driveway that senses when a vehicle is sitting on it. It tells the operator this is a car, not a person, and it holds the gate open until the vehicle clears. Without one, the gate can close onto a car that’s just creeping through. In Folsom, where many drives are tighter than the ones in newer Sacramento suburbs, the loop keeps the gate from fighting the car. We cut and seal the loop as part of every full electric gate install, and we test it with your vehicle before we leave.
We stage the job around your access. The old gate stays on its hinges until the new posts are set and cured. Then we swap the gate in a single day, so the drive is open that morning and gated again by evening. If the job runs long, we set a temporary chain and lock before we leave, and we tell you exactly what time we’ll be back. We won’t leave your home ungated overnight without you knowing. Folsom drives are often the only way in, and we plan installs like that’s true, because it is.
Not always, but on hillside lots where trenching means cutting through rock or a retaining wall, solar is usually the smarter install. A Mighty Mule or LiftMaster solar opener with a properly sized panel and battery will handle Folsom’s hot summers and wet winters without a $4,000 trench. If your lot has heavy shade from oaks, we’ll tell you solar isn’t the right call and show you the wired option instead. Either way, the price is in writing before any work begins. Call (279) 266-8501 for a free site look.
Get Your Folsom Gate Quote Today
If your gate sags, drags, or won’t hold alignment in Folsom’s clay soil, call us. We’ll measure the posts, check the footings, and give you a written price that covers the gate, the opener if you want one, and the labor to hang it right. No pressure, no surprise line items. We wear shoe covers inside your home, lay drop cloths where we work, and send you a photo of the cleanup before we leave. That’s the Cedarwell Care Promise, and it applies to every Folsom gate job we do. Call (279) 266-8501 now, and a live person will answer.
Written by Cody Beckman, Owner at Latch and Post Gate Repair, serving Folsom and surrounding communities since 2009.