Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Sacramento Homeowners
A new driveway gate in Sacramento typically costs between $1,800 and $7,500 installed, depending on the gate style, material, and whether you’re adding automation. We’ve been installing gates across Sacramento since 2009 as part of the Cedarwell family, and we approach every job the same way: a written price before we touch anything, drop cloths and shoe covers inside your home, and a photo of the cleanup before we leave. If you’re ready to talk through options for your property, call (279) 266-8501 and a live person will answer, day or night.
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on, and it’s why so many Sacramento families call us when the old gate sags, drags, or stops closing right. Whether you’re replacing a rotted wood gate in Land Park, adding a steel Driveway Gate in Natomas, or automating an existing gate in East Sacramento, we’ll measure, quote, and install with the same calm, precise routine every visit.
Automatic Gate Installation
Automatic Gate Installation is the process of adding a motorized opener system to a new or existing gate so it opens and closes without leaving your car. Most Sacramento homeowners choose this when they’re tired of getting out in the rain to open a heavy driveway gate, or when they want to keep kids and pets inside the yard without a latch someone forgets to close. Latch and Post Gate Repair Sacramento handles the full scope: gate structure, opener mounting, wiring, safety sensors, and programming. Expect to pay between $2,500 and $6,000 for a complete automatic gate install, with the exact number in writing before any work begins.
Opener Selection and Sizing
We factory-trained our technicians on home gate systems from LiftMaster and other major brands, so the opener matches the gate’s weight and cycle frequency. A gate that’s too heavy for its opener will burn out a motor in months, not years. We calculate load, wind exposure, and daily cycles before recommending anything.
Sensor and Safety Edge Installation
Every automatic gate we install includes photo-eye sensors and a reversing safety edge as standard. These stop the gate if a child, pet, or car is in the path. Sacramento code requires these protections, and we don’t treat them as optional add-ons.
Styles & brands we work with
Gate Installation Services
Gate Installation - Sacramento services at Latch and Post Gate Repair Sacramento cover the full replacement or new installation of residential gates in wood, steel, aluminum, and wrought iron. You need this when a gate is rotted at the bottom, sagging past the point of hinge repair, or when you’re building a new fence line and need a gate that matches. We handle demolition of the old gate, post setting, hinge and latch mounting, and final alignment. Most standard installations in Sacramento run $1,800 to $4,200, and you’ll see the exact figure in writing before we start any work.
Material Recommendations for Sacramento Weather
Our summers hit 100 degrees and our winters bring real rain. Wood gates need sealing on a schedule, while powder-coated steel handles both extremes with less upkeep. We’ll show you samples and talk honestly about what each material will look like in five years, not just on day one.
Post Setting Done Right
A gate only works as well as its posts. We set steel posts in concrete below the frost line and check plumb before anything gets hung. In older Sacramento neighborhoods with shifting clay soil, we’ll often recommend a deeper set than code requires because we’ve seen what happens when posts lean after two wet winters.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation
Electric Gate Installation is the complete wiring and automation of a gate system, including the power run from your home or panel, the opener arm or slide motor, safety devices, and any keypads or remotes. Sacramento homeowners choose this when they want a driveway that opens with a button, or when they’re adding a Pedestrian Gate to a new build and want it integrated from the start. We pull permits where required, run conduit and wiring to code, and program everything before we leave. A full electric gate installation typically runs $2,800 to $6,500 depending on the distance of the power run and the type of opener.
Power Run and Conduit
The power run is often the most underestimated part of an electric gate job. We trench carefully around irrigation lines, follow the shortest safe path, and use weather-rated conduit throughout. In Sacramento’s older districts, we always check for shallow utilities before the first shovel goes in.
Remote, Keypad, and App Setup
After the gate is powered and moving smoothly, we program every remote, set the keypad codes, and walk you through the app if your opener supports it. You’ll test the gate yourself before we pack up, and we don’t leave until the safety edges and sensors trip correctly.
Driveway Gate Installation
Driveway Gate Installation is the design and installation of a gate across your vehicle entrance, either swinging or sliding, manual or automated. You need this when you want to control who comes onto your property, keep kids and dogs from reaching the street, or simply mark the entrance more clearly for deliveries and guests. Latch and Post Gate Repair Sacramento handles the full job from post to finish, including precise hinge alignment and latch hardware that won’t bind. Most driveway gate installations in Sacramento cost between $2,200 and $5,800 installed, quoted in writing before work starts.
Swing Gate vs. Sliding Gate
If your driveway slopes toward the street or has limited swing clearance, a sliding gate usually makes more sense. If the entrance is flat and you have room inside the property line, a swing gate works well and costs less to automate. We’ll measure your actual entrance and show you both options with honest trade-offs.
Setback and Approach Considerations
The approach to your driveway matters more than most people expect. Gates need a proper setback so a car can pull off the street and wait for the gate to open without blocking traffic. In busier Sacramento corridors, we often recommend a setback of 20 feet or more, and we’ll mark it out on site so you can see how it feels before committing.
Sliding Gate Installation
Sliding Gate Installation is the setup of a cantilever or track-guided gate that moves horizontally along your fence line instead of swinging into the yard or driveway. It’s the right choice when a driveway slopes, when snow or debris would block a swing path, or when you simply don’t want to give up yard space to a gate arc. Sacramento’s flat lots often still benefit from sliders on narrow properties where a swing would hit a parked car. Expect to pay between $2,800 and $6,200 for a sliding gate installed with its track and support hardware.
Cantilever vs. Track Systems
Cantilever sliders float above the ground on rollers, so they never drag through leaves or gravel. Track systems run on a wheel in a ground rail and cost a bit less, but the track needs regular clearing in Sacramento’s fall leaf season. We’ll walk you through which one fits your entrance and your willingness to maintain it.
Roller and Bearing Hardware
The hardware is where sliding gates either last 15 years or fail in three. We use sealed bearings and adjustable roller brackets, and we set the gate so it carries its weight evenly across every roller. A sliding gate that sags on one end will tear up its own track, and that’s a repair we’d rather prevent than fix later.
Gate Opener Installation
Gate Opener Installation is the mounting and wiring of a motorized opener onto a gate, either new or existing, so it opens with a remote, keypad, or phone app. You need this when you already have a good gate but still get out of the car every day to open it, or when an old opener has failed and needs replacement rather than continued patching. We install openers from DoorKing, LiftMaster, and other residential brands, matching the motor to the gate’s actual weight and cycle count. A straightforward opener installation on an existing gate runs $1,200 to $2,800, and the written quote you get before work starts is the price you pay.
Opener Retrofit on Existing Gates
Retrofitting an opener onto an older gate means checking the hinges, posts, and latch first. An opener will expose every weakness in a gate’s structure within weeks. We inspect the full assembly before we recommend automation, and if a hinge or post needs replacement, we’ll show you why in person.
Backup Power and Battery Options
Sacramento power outages come with heat waves and winter storms alike. We can add a battery backup so your gate still opens during an outage, which matters if the gate is your only vehicle access. We’ll quote the battery option separately so you can decide with the real number in front of you.
Gate Fabrication
Gate Fabrication is the custom building of a gate to fit an exact opening, style, and material specification when an off-the-shelf gate won’t work. You need this if your opening is an odd width, if you want a specific design to match your home’s architecture, or if you need a gate built to hold an opener and safety system from day one. We fabricate steel and aluminum gates to order for Sacramento properties, with powder coating done before install so the finish is even and complete. Custom fabrication typically runs $3,000 to $7,500 depending on size, material, and design detail, with a written quote before any work begins.
Custom Sizing and Design
Standard gate panels come in even widths, and Sacramento’s older neighborhoods rarely have even openings. We measure to the half-inch, design the frame and infill to carry the gate’s weight correctly, and show you a drawing before metal gets cut. You always know what you’re getting.
Powder Coating and Finishing
Powder coating is applied by a local finishing shop we’ve worked with for years, then the gate is installed with protective hardware so the coating isn’t scratched during mounting. A fabricated gate with a proper finish lasts far longer in sun and rain than a painted one, and the difference shows within a few seasons.
Brands We Service
We work on DoorKing openers regularly across Sacramento, including their slide and swing arm models. Our technicians have installed and repaired enough of them to know the common failure points, and we carry the OEM parts that keep them running like the day they were new. If your DoorKing opener is slow, noisy, or tripping its breaker, we can usually diagnose it in one visit.
LiftMaster and Elite residential openers are also in our regular rotation. Gate Installation in Elk Grove families often run LiftMaster jackshaft openers on their driveway gates, and we’ve seen how those units hold up in Sacramento’s summer heat. Whether you have one of these brands or another make entirely, we’ll service it and quote the repair or replacement in writing before we start.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Your gate drags on the ground or won’t latch. A dragging gate wears down hinges and latch hardware fast, and a gate that won’t latch is an open invitation to every loose dog in the neighborhood. The post is usually the root cause, and delaying makes the post failure worse.
- The opener makes a grinding or straining noise. Grinding means gears or chain tension are off, and straining usually means the gate is too heavy for the motor. Left alone, the opener burns out completely and the repair bill doubles.
- The gate sags visibly at the latch end. Sag means a post is leaning or a hinge is pulling out. Every week it sags further, the repair gets more involved and more expensive. This is the most common issue we correct in Sacramento’s older neighborhoods.
- The safety sensors or auto-reverse stopped working. If the gate doesn’t reverse when something blocks it, a child or pet can be seriously hurt. This is a safety issue, not a convenience issue, and it needs a trained technician with the right test equipment.
- You’re propping the gate open with a brick or bungee cord. If the gate can’t hold itself open or closed, the hardware has failed somewhere. Propping it hides the problem and makes the eventual fix harder because the gate gets used while misaligned.
Our Process, Step by Step
- 1
Call and talk to a person. When you call (279) 266-8501, a live person answers, 24 hours a day, every day. You’ll describe what’s happening with your gate or what you want from a new one, and we’ll schedule a time that works around supper, nap time, or your workday.
- 2
On-site measurement and assessment. We come to your Sacramento home, measure the opening, check the ground slope and approach, and look at any existing posts or operator equipment. We put on shoe covers before stepping inside if we need to access your panel or show you an opener placement.
- 3
Written price, explained clearly. Before any work starts, we give you a written price that covers the full scope. We’ll walk you through what’s included, what it costs, and what your alternatives are if you want to phase the project. No pressure, no obligation, no disappearing discount.
- 4
Installation with the C.A.R.E. routine. Our background-checked, uniformed technicians follow the Cedarwell C.A.R.E. values on every visit: clean up like it’s our own home, ask before moving or touching anything, respect your family’s time and quiet hours, and explain the price before the work. Drop cloths go down where we’re working, and we choose pet-safe lubricants where there’s a choice.
- 5
Walkthrough and cleanup photo. We test the gate with you, show you how the remotes, keypad, and safety features work, and then take a photo of the cleaned-up work area before we leave. It’s proof that your floors look the way they did when we arrived. And if anything isn’t right within 365 days, the Done Right Promise means we make it right, no argument, no fine print.
How Much Does Gate Installation Cost in Sacramento?
A typical manual gate installation in Sacramento runs $1,800 to $4,200, while an automated driveway gate with the opener and wiring usually lands between $2,800 and $6,500. For more details, see our Gate Installation pricing breakdown. Custom fabricated steel gates start around $3,000 and can reach $7,500 for larger or more detailed work. These ranges assume standard residential openings and normal ground conditions across the Sacramento area.
What moves the price is mostly the gate material, the opener type, and how far power has to travel. A long power run from the panel to the gate can add $500 to $1,200 by itself. The gate’s weight also matters: a heavy steel sliding gate needs a bigger opener than a lightweight aluminum swing gate, and that costs more. To avoid overpaying, get a written quote that separates materials, labor, and any electrical work so you can see exactly where the money goes. Our free estimates include the measurement, the material recommendation, and the full written price before anything gets ordered, and you’re never pressured to accept on the spot.
If you’re comparing quotes from other Sacramento gate companies, look for whether the price includes post setting, hardware, safety sensors, and cleanup. Some quotes look lower because they leave out the safety edges or the power run, then add them as change orders later. Our written price covers everything we’ve identified, and it’s the price you approve before we begin.
Our Service Area Near Sacramento
We install gates throughout Sacramento and the surrounding communities, including Gate Installation in Roseville, Elk Grove, Citrus Heights, Rancho Cordova, Carmichael, Rocklin, Woodland, West Sacramento, Antelope, Lincoln, and Orangevale. Most installations in the metro area are scheduled within a few days of your estimate, and our live phone line means you can always reach a person to check on scheduling. If you’re within the greater Sacramento region, we’d be glad to come take a look.
Serving Sacramento, CA - Our Local Coverage Area
We’re based in the Sacramento area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Sacramento
Gate installation is the process of setting gate posts, mounting a gate panel or fabricated gate, installing hinges and latch hardware, and adjusting everything so the gate swings or slides smoothly. For automated systems, it also includes mounting the opener, running the electrical, and installing safety sensors. We handle the full job from removing the old gate to the final walkthrough.
Most residential gate installations in Sacramento take one day for a standard manual gate, and one to two days when we’re adding automation and electrical work. Fabricated gates add time because the gate is built and powder coated before install day. We’ll give you a realistic timeline in your written estimate so you know exactly what to expect.
A manual gate installation typically runs $1,800 to $4,200, and an automated installation with opener runs $2,800 to $6,500. Custom fabricated gates start around $3,000 and can reach $7,500. The exact price depends on your gate’s size, material, opener type, and the distance of the power run, and we’ll put the full number in writing before any work starts. Call (279) 266-8501 for a free estimate on your specific gate.
Yes. Our technicians are factory-trained on LiftMaster, DoorKing, Elite, and other major residential gate opener brands, and we carry the OEM parts to keep them working. Whether you’re installing a new opener or replacing an old one, we’ll match the motor to your gate’s weight and cycle count and quote the job in writing before we begin.
In most cases we can schedule your installation within a few days of the on-site estimate, depending on material availability and any fabrication required. If your gate is a safety issue, a fallen gate is blocking your driveway, or a child or pet can reach the street, tell the live person who answers and we’ll do everything we can to get there sooner. Calls are answered 24 hours a day, seven days a week.
Every installation we complete is covered by the 365-Day Done Right Promise. If the installation isn’t right within a year, we make it right, no argument and no fine print. That covers the gate, hardware, opener work, and any adjustment needed to keep everything operating the way it should.
Clear the area around the gate opening so our crew has room to work, move any vehicles out of the driveway approach, and secure pets inside the house or back yard. If we need to access an electrical panel inside the home or garage, have that area reachable. We’ll bring drop cloths and shoe covers for anything inside, and we’ll tell you exactly what to expect before we arrive.
Schedule Your Gate Installation Service in Sacramento Today
If you’re ready to talk about a new gate for your Sacramento home, call (279) 266-8501. A live person answers day or night, and we’ll set up a free on-site estimate with no obligation. You’ll get a written price before any work starts, and the C.A.R.E. routine on every visit. That’s the way it should work, and that’s how we’ve done it since 2009.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Sacramento, serving the Sacramento area since 2009.