Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Folsom, CA
Folsom gates take a beating that gates in flatter, cooler towns never see. The combination of 1990s and 2000s tract homes with ornamental steel gates on wood posts, plus clay soil that shifts with every wet winter, means most of our Folsom calls come down to two things: a post that’s rotted or moved, and a gate that no longer sits square in its opening. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we focus on exactly those failures. If your gate drags, won’t latch, or sags against the post, call us at (279) 266-8501 and we’ll walk through what’s happening before anyone rolls a truck.
Why Folsom Homes Are Different
Most of Folsom’s housing stock was built during a specific window, from roughly the early 1990s through the mid-2000s, and those neighborhoods have a signature gate setup: a 10-foot wide ornamental steel tube gate hung on pressure-treated wood posts. That design was fine for the first decade. Now the posts have dry-rotted below grade, especially where sprinkler overspray soaks the base every summer, and the clay soil beneath them swells and shrinks so much that the posts lean. It’s rare to find a Folsom gate from that era that’s still square.
Communities like American River Canyon and Empire Ranch see this more than most. The standard double driveway gates there were never engineered for Sacramento-area soil movement, so hinge brackets twist and welds crack. We regularly cut off old brackets and re-weld them at a corrected angle rather than forcing a bent gate to fit a leaning post. Down near the historic district, the older ranch homes tend toward simpler chain-link or light metal gates, and those bring a different set of problems: latch wear, rust at ground level, and concrete footings that predate modern setback requirements.
The summers don’t help. Wood post shrinkage is real, and it shows up as a gate that latches in June but won’t catch in January because the post has rehydrated and moved a half-inch. If you’re in the wildland-urban interface pockets above the river, dust and sprinkler overspray also accelerate corrosion on hinges and latch hardware. All of this means gate work in Folsom is less about replacing a single worn part and more often about correcting what the soil has done to the structure.
Styles & brands we work with
Our Main Folsom Services
These three jobs cover most of what we do in Folsom, and each has its own page with pricing, timelines, and the specific brands we service.
Gate Repair in Folsom
Repair work here usually starts with a sagging or dragging gate, a latch that won’t hold, or a post lean you can see from the street. Because so many Folsom posts are original to the home, dry rot below grade is common, and the real fix is often a post replacement rather than a hinge adjustment. Our technicians are background-checked and uniformed, and they follow the same Cedarwell Care routine on every visit: shoe covers and drop cloths if we step inside, a written price before any work starts, and a photo of the cleanup before we leave. We can schedule around nap time if it matters. Gate Repair in Folsom
Gate Installation in Folsom
A new gate in Folsom means deciding on materials that can handle the heat and the soil before we dig the first hole. We talk through wood post versus steel post options, look at your ground conditions, and measure so the finished gate hangs plumb on day one. Installation projects get a written quote that covers the gate, hardware, and cleanup, with no surcharge for the shoe covers and drop cloths we already bring as standard. If you’re part of an HOA with architectural guidelines, we’ll work from what the committee requires but won’t handle the submittal for you. Gate Installation in Folsom
Electric Gate Repair in Folsom
Electric gates in Folsom fail in predictable ways: control boards that cook in summer heat, sensors knocked loose by gate movement, and operators that run the gate into a post that’s shifted. We service LiftMaster, FAAC, BFT, Mighty Mule, and several other common openers, and we diagnose the problem in writing before replacing anything. The 365-Day Done Right Promise covers electric repairs the same as mechanical ones, so if a fix doesn’t hold, we come back and make it right. Electric Gate Repair in Folsom
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Folsom
We carry parts for the openers Folsom homes actually have, which today means a lot of LiftMaster and Mighty Mule swing-arm and slide operators, plus FAAC and BFT hydraulic units in the older subdivisions. Because these are common in Folsom, many parts are already on the truck, which shortens turnaround to a single visit more often than not. You can see the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Folsom, CA
| Service | Typical range in Folsom |
|---|---|
| Gate latch replacement | $85 – $160 |
| Hinge replacement, welded steel | $110 – $190 |
| Single gate realignment | $140 – $260 |
| Gate frame straightening, steel | $180 – $320 |
| Wood post replacement, single gate | $240 – $420 |
| Steel post replacement, single gate | $320 – $550 |
| Driveway gate weld repair | $130 – $280 |
| New wood gate, single | $350 – $700 |
| New ornamental steel gate, single | $450 – $950 |
| Electric opener diagnostic | $90 – $160 |
| Circuit board replacement | $220 – $430 |
| Safety sensor replacement | $120 – $230 |
Folsom pricing runs a little higher on jobs that involve post work, because our soil usually means digging deeper footings than the original builder allowed for. If your gate hasn’t been replaced since the home was built, we budget for a footing that will actually hold through a wet winter. Whatever the number ends up being, you’ll see it in writing before any work begins, and it doesn’t change unless we find something structural that needs your sign-off first.
Neighborhoods We Serve in Folsom
We run gate service calls all over Folsom, from the hillside communities along the river to the flatter subdivisions south of Highway 50. Most repair appointments in the city are scheduled within a few days, and emergency calls get the next available window since we answer the phone around the clock.
- American River Canyon
- Empire Ranch
- Briggs Ranch
- Natoma Ridge
- Folsom Historic District
Service Area – Cities Near Folsom
Folsom sits at the eastern edge of the Sacramento metro, and our crews serve the surrounding communities as well. We take jobs in Orangevale, CA, Granite Bay, CA, Fair Oaks, CA, and Roseville, CA. Scheduling is coordinated from the Sacramento office, with local crews dispatched to Folsom and the nearby cities.
Serving Folsom, CA - Our Local Coverage Area
We’re based in the Folsom area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Folsom
Most non-emergency repairs in Folsom get a scheduled visit within a few days. If a gate is stuck open, won’t close, or is hanging by one hinge, tell the person on the phone and we’ll prioritize the next available window. Calls are answered live at (279) 266-8501, 24 hours a day, including weekends and holidays.
That depends on your HOA’s governing documents. Many Folsom subdivisions, especially the gated communities built in the 1990s and 2000s, have architectural guidelines covering gate style, height, and color. Repairs that match the existing design usually pass without a submittal, but replacement gates often need committee sign-off. We’ll build to what the HOA requires, but the approval itself is between you and the association.
Hillside lots in communities like American River Canyon add a layer of care because gravity works against the gate on a slope, and drainage can wash soil away from post footings. We inspect for erosion and post lean before adjusting hinges or latches, and we’ll quote a deeper footing if the existing one isn’t holding. The written price you get before work starts covers that recommendation, and nothing changes without your approval.
If your Folsom gate is dragging, sagging, or just won’t latch the way it used to, call (279) 266-8501. You’ll speak with a live person, get a straight answer on next steps, and have a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Folsom Customers Say
"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Installed a new gate motor and remotes. Respectful crew, protected the driveway, and cleaned up every bit of welding debris. Walked me through the new setup patiently."
- Nick Farrow"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon