Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Loomis
Most gate repairs in Loomis come down to one of three problems: a motor that won’t cycle, hinges that have sagged under the weight of a heavy steel gate, or a post that shifted after a winter rain. We fix all three, usually the same day, and you’ll see the exact price in writing before we touch anything. If you’re off King Road with a tube-frame gate dragging through decomposed granite, or up near Horseshoe Bar Road with a solar opener that quit after a July heat wave, call (279) 266-8501. A live person answers, any hour, any day.
Loomis isn’t Roseville. The lots are bigger, the gates are wider, and most of them are wired for solar because the house can sit 200 feet from the road. Our techs know what that means for battery life, panel angle, and operator torque. They live and work in the same summer heat your gate does, and they bring the parts that actually fail out here: deep-cycle batteries, heavy-duty hinge plates, keypads you can work with riding gloves on.
Why Latch and Post Gate Repair Sacramento Is Loomis’s Preferred Gate Repair Company
We’re part of the Cedarwell family of independently owned gate specialists, operating since 2009, and we’ve spent years working on exactly the kind of gates Loomis homeowners actually have: custom steel swing gates, solar-powered slide gates, and wide farm entrances built for horse trailers. Our Gate Repair team shows up with shoe covers, drop cloths, and a written price before the work begins. That’s not an upsell. It’s the standard.
Loomis customers tend to care about two things: whether the gate will keep working through the next heat wave, and whether the crew leaves the driveway cleaner than they found it. We handle both. Every technician follows the Cedarwell C.A.R.E. routine, which means we ask before moving anything, respect quiet hours if kids are napping, and send you a photo of the clean-up before we drive away. The 365-Day Done Right Promise covers every job. If it’s not right, we make it right, no argument.
Our response to Loomis is quick enough that a failed opener on a Monday morning usually means the gate is working again before the afternoon chores start. Dispatch runs from our Sacramento office, but the crews serving Loomis know the area. They’ve driven Taylor Road, they know where the decomposed granite eats gate wheels, and they know which solar panels bake in the afternoon sun off Barton Road.
Styles & brands we work with
Commercial Gate Repair in Loomis
Commercial Gate Repair in Loomis usually means a wide slide gate on a farm entrance, a ranch access gate on a sloping gravel drive, or an automatic gate at a small stable or riding facility where the operator cycles dozens of times a day. These gates carry a different duty cycle than a residential driveway gate. The motors need higher torque, the rack and pinion needs to stay aligned, and the safety loops need to trigger reliably when a truck or trailer sits over them. A standard commercial gate repair in Loomis runs $350 – $900 depending on the opener type and whether we’re replacing the motor, the rack, or the control board. You’ll see the exact number in writing before we start.
High-Cycle Operators and Rack Replacement
Most Loomis commercial gates run on LiftMaster or FAAC slide operators, and after a few summers the control board’s thermal protection starts tripping during the hottest part of the day. We keep boards and motors in stock for the brands Loomis properties actually use, and we install them with fresh thermal paste and a shade guard where the housing sits in direct sun. If the rack is jumping teeth because the driveway heaved, we reset the rack spacing and torque the bolts to spec rather than just tightening the chain and hoping.
Trailer Access and Loop Detection
A commercial gate that works fine for cars can hang up for a horse trailer because the exit loop doesn’t read the trailer’s steel until the truck is already past the sensor. We set loop sensitivity and delay timing around real trailer traffic, and we test the open and close cycles with a long wheelbase in mind. That’s a twenty-minute adjustment that prevents a trailer fender from meeting a closing gate.
Iron Gate Repair in Loomis
Iron Gate Repair in Loomis covers the heavy custom swing gates that are everywhere on the multi-acre properties this town is known for. These gates are beautiful and brutally heavy. Over time, the hinge posts lean, the gate sags, and the leading edge digs into decomposed granite until the operator’s motor gives up trying to push it. Most iron gate repairs in Loomis run $225 – $650, whether we’re reinforcing a hinge post, welding a cracked joint, or straightening a sag. The price is written down and agreed before any work begins.
Hinge Post Reinforcement and Sag Correction
We see this pattern constantly: a custom steel gate that looked perfect in September starts dragging by February. The soil around Loomis shifts when winter rain saturates it, and a post that was plumb in dry weather settles just enough to throw the whole gate out of level. We drill and set a reinforced post footing, add a hinge-post plate, and recalibrate the opener so it isn’t fighting the gate’s extra drag. That’s often the whole repair.
Weld Repair and Panel Alignment
Rust along the bottom rail and cracked welds at the hinge joints are the two most common iron gate failures we fix in Loomis. We grind back the rust, weld the joint with proper penetration, and re-coat the repair so it disappears into the rest of the gate. If the panel itself has twisted over the years, we re-align it before we adjust the hinges. Otherwise you end up with a gate that opens but looks like it’s limping.
Trusted Brands We Service in Loomis
Our techs are factory-trained on the equipment Loomis properties actually run: LiftMaster and FAAC for heavy swing and slide gates, Mighty Mule for smaller residential openers, and BFT where the original installer specified Italian hardware. We stock control boards, remotes, safety eyes, and deep-cycle batteries for these brands in our local service vehicles, so a repair usually happens in one visit instead of two. If your Mighty Mule keypad stops talking to the board after a hot spell, we don’t order a part and come back next week. We bring it with us.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Loomis Homes
- Solar opener batteries failing after July heat: Loomis’s intense summer sun cooks the batteries inside solar gate openers, especially when the panel sits where the afternoon sun hits hardest. We swap in deep-cycle batteries and reposition panels so they catch morning sun instead of overheating at 4 p.m.
- Gate dragging after winter rains: The decomposed granite soil around Loomis shifts when it gets wet, and that shift tilts hinge posts enough that a heavy gate starts scraping the ground. We re-set the post and reinforce the hinge so the gate clears even when the ground settles again.
- Circuit board entrapment alarms in summer: LiftMaster and DoorKing boards mounted in direct sun trigger false entrapment alarms that lock the gate shut until someone resets the thermal protection. We re-seal the housing, add shade where it’s needed, and replace boards that have already burned out.
- Keypads failing with gloved hands: Loomis has a lot of people opening gates while wearing riding gloves, and cheap membrane keypads crack or stop registering after a season of use. We install heavy-duty keypads with tactile buttons that work with gloves on, and we program entry codes on the spot.
Pricing for Gate Repair in Loomis, CA
Here’s what Loomis homeowners can expect to pay. A standard gate latch replacement runs $95 – $185. A hinge repair or post reinforcement runs $200 – $450. A solar battery swap with panel repositioning runs $150 – $300. A full operator replacement, including the motor and control board, runs $500 – $1,100 depending on the brand and whether we’re rebuilding or replacing. What changes the number most is the gate’s weight and the condition of the post. You’ll always know the full price before we start.
We Also Serve Cities Near Loomis
While this page is for Gate Repair in Loomis, our same crews also cover Rocklin, Granite Bay, Roseville, and Lincoln. If you’re on the edge of Loomis near the Rocklin line or out toward Penryn, call (279) 266-8501 and we’ll tell you straight whether we can reach you today.
Serving Loomis, CA - Our Local Coverage Area
We’re based in the Loomis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Loomis
Solar openers in Loomis typically lose battery capacity after one or two summers because the July heat degrades the battery chemistry faster than the panel can compensate for. The fix is usually a deep-cycle battery replacement and a panel angle adjustment so the panel catches morning sun rather than baking in the afternoon heat. Call (279) 266-8501 for an exact quote on a battery swap, the estimate is free.
The decomposed granite soil around Loomis shifts when winter rain saturates it, and that movement tips a hinge post just enough that the gate’s leading edge drags. We correct this by re-setting the post in a reinforced footing and adding a hinge-post plate, then re-leveling the gate so it clears the ground by at least two inches even when the soil moves again.
You usually don’t need a completely different operator, but you do need one rated for the gate’s full travel weight and a loop detector system timed for a long wheelbase. We set the close delay longer so a trailer clears the gate path before it begins to swing, and we test the cycle with a trailer in mind. Call (279) 266-8501 and we’ll tell you what your current setup can handle.
Yes, and it’s a common Loomis failure because many driveways slope just enough that a misaligned rack pops teeth under load. We reset the rack spacing, secure the pinion, and if the driveway has heaved we shim the track so the gate runs cleanly from fully open to fully closed. A rack and pinion realignment in Loomis runs $185 – $400.
Any existing automatic gate should have working safety edges or photo eyes that stop and reverse the gate if something is in the path, and we test these on every repair visit whether or not the original problem involved them. If a photo eye has failed or a safety edge is cracked, we replace it before we leave. Call (279) 266-8501 for a safety inspection and a written price.
Most Loomis calls are reached the same day, and emergency calls are answered by a live person 24/7. Call (279) 266-8501 and the dispatcher will give you a real arrival window, not an automated message.
Yes. Every gate repair and installation we do in Loomis is covered by the 365-Day Done Right Promise. If the repair isn’t right, we make it right at no charge. No fine print.
When you’re ready for a gate that opens and closes like it should, call (279) 266-8501 for a free estimate. We’ll give you a clear, written price, protect your floors with drop cloths and shoe covers if we step inside, and handle the repair while you get on with your day. Latch and Post Gate Repair serves all of Loomis, from rural acreage entrances to neighborhood driveways.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Sacramento, serving Loomis since 2009.