Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Rocklin
A sagging gate on a Rocklin hillside is rarely just a hinge problem. It’s usually the post moving in expansive clay, or a steel panel that’s been pulling against its operator for months. We’re Latch and Post Gate Repair, part of the Cedarwell family, and we’ve worked on enough custom gates in Whitney Ranch, Whitney Oaks, and Stanford Ranch to know exactly what Rocklin’s soil and sun do to iron and steel. Call (279) 266-8501 and you’ll get a live person, day or night. We’ll give you a written price before any work begins, and we’ll treat your house the way we’d want ours treated.
Why Latch and Post Gate Repair Sacramento Is Rocklin’s Preferred Gate Repair Company
We’re not a general handyman service that happens to hang gates. Gates are the only thing we do, and Rocklin keeps us busy with a particular kind of problem: heavy custom gates on sloped lots, set in soil that moves. When a homeowner in Whitney Oaks calls about a gate that drags on the driveway, we know to check the post footing before we even touch the hinges. That’s local knowledge you don’t get from a call center.
Our crews are dispatched from our Sacramento office and serve Rocklin regularly throughout the week. We answer the phone with a live person, 24 hours a day, and we schedule around your family’s routine. If you’ve got a sleeping toddler or a dog who bolts when the gate opens, tell us on the phone. We’ll plan for it.
Every Latch and Post technician is background-checked, uniformed, and trained on the brands Rocklin families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We put on shoe covers and lay drop cloths before we step inside your home, and we take a photo of the cleanup before we walk out. That’s the Cedarwell C.A.R.E. standard on every job.
And if something isn’t right after we leave, the 365-Day Done Right Promise means we come back and fix it. No argument. No fine print.
Styles & brands we work with
Gate Welding in Rocklin
Gate welding in Rocklin is the difference between a repair that holds and one that cracks again next season. Wrought iron and welded steel gates are the standard here, especially in newer subdivisions around West Oaks and the hills above Sunset Boulevard. When a hinge tears loose or a picket snaps at the weld, a bolt-on patch won’t last. The panel needs to be ground clean, welded properly, and braced so the repair doesn’t flex in the heat.
When Welding Is the Right Fix
A cracked iron hinge leaf on a heavy ornamental gate can’t be tightened back into service. We weld the crack, reinforce the joint with a steel gusset where the design allows, and re-hang the gate so it swings true. In Rocklin, where summer heat expands metal and winter rain saturates the clay, a weld done without proper cooling and brace positioning will fail within a year. We’ve seen it too many times.
What Rocklin Homeowners Pay for Gate Welding
A standard on-site weld repair in Rocklin typically runs $150 to $450, depending on the size of the crack and whether the panel needs to come off the posts. If the post itself has shifted and the weld failed at the hinge, you’re looking at $500 to $1,200 for a new post set in a properly cured footing plus the weld work. You’ll see the exact number in writing before we pick up a torch.
Commercial Gate Repair in Rocklin
Commercial gate repair in Rocklin covers the sliding gates at office parks along Granite Drive, the swing gates at apartment complexes, and the heavy vehicle gates that secure storage yards and commercial properties. These gates run on duty cycles no residential gate ever sees, and when they fail, they fail hard. A down gate at a commercial property means blocked deliveries, angry tenants, and a security gap that can’t wait until Monday.
Operators, Safety Edges, and Access Control
We service commercial operators from FAAC, BFT, and Linear, including the models common in Rocklin’s newer business parks. Entrapment protection, safety photocells, and ground loops all need to test correctly after any repair. We verify the full safety circuit before we call the job done, because a commercial gate has to stop and reverse at the right pressure or it’s a liability, not access control.
What a Commercial Gate Repair Costs in Rocklin
A commercial operator replacement in Rocklin, including labor and the new unit, generally runs $1,400 to $3,200 depending on the operator’s size and duty rating. A safety edge or photocell repair is usually $250 to $600. For a full assessment of a gate that’s running rough or won’t respond, we come out and give a written quote before any work starts. Call (279) 266-8501 to schedule.
Trusted Brands We Service in Rocklin
We’re factory-trained on the gate equipment Rocklin homes and businesses actually run. LiftMaster operators are the most common on residential swing gates in this area, and FAAC and BFT show up often on newer commercial installations. We keep common parts for these brands stocked and ready to load for Rocklin service calls: control boards, limit switches, safety edges, and gear racks. That means less waiting on a shipped part when your gate is stuck open. If the rack and pinion on your slide gate is stripped, which we see a lot in full-sun Whitney Ranch yards, we can usually have the replacement rack in hand the same day.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Rocklin Homes
- Posts drifting out of plumb in expansive clay. Rocklin’s newer subdivisions sit on former oak woodland soil that swells with winter rain and shrinks through the hot summer. A post set in a shallow footing shifts within a few seasons, and the gate starts dragging or the strike plate stops lining up.
- Plastic gear racks stripping on Whitney Ranch slide gates. Direct afternoon sun heats a plastic rack and pinion fast enough that the teeth soften and strip, usually within two summers. The operator runs, the motor groans, and the gate doesn’t move.
- Cast iron hinge leaves cracking under a sagging gate. When a post shifts and the panel drops, the hinge carries weight it wasn’t designed for. Cast iron doesn’t bend. It cracks, usually at the bolt flange.
- Photocells knocked out of alignment at the bottom of sloped driveways. Loose gravel, shifting pavers, or a car nudging past sends the safety beam off-line. The gate reverses mid-cycle every time, and the homeowner thinks the operator has failed.
Pricing for Gate Repair in Rocklin, CA
A simple hinge adjustment or latch realignment in Rocklin typically runs $120 to $250, including travel. A standard rack and pinion replacement on a slide gate is $350 to $700 depending on the length of the rack. Post resetting, where we dig out the old footing and set the post deep in properly cured concrete, runs $600 to $1,500. A full operator replacement with a LiftMaster, FAAC, or BFT unit is $1,200 to $3,000 installed. What changes the price is the weight of the gate, the slope of the driveway, and whether the post has shifted and needs to be reset. You’ll get every number in writing before any work starts. No pressure, no surprise invoice. Our Gate Repair team serves Rocklin with free estimates on every job.
We Also Serve Cities Near Rocklin
While this page is for Gate Repair in Rocklin, our crews regularly run calls in Roseville, Loomis, Granite Bay, and Citrus Heights. If you’re on the edge of Rocklin, say near the Loomis border off King Road, just let the dispatcher know when you call and we’ll sort out the schedule.
Serving Rocklin, CA - Our Local Coverage Area
We’re based in the Rocklin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Rocklin
The problem is almost always the post, not the hinge. In Rocklin’s expansive clay soil, a post set in a shallow footing drifts out of plumb within a few years. Tightening the hinge bolts just pulls the panel back into a bind. The permanent fix is to reset the post at a proper depth with a cured concrete footing, then re-hang the gate. Call (279) 266-8501 and we’ll tell you if your post is moving before we quote the job.
Yes, and we see it all the time in Whitney Ranch, where direct afternoon sun heats plastic gear racks until the teeth strip. The operator is running fine. It’s just spinning against a smooth rack. Replacing the rack with a metal one, or simply replacing the stripped section, gets the gate rolling again. The repair usually runs $350 to $700 in Rocklin.
Yes. Any automated gate is required to have functioning entrapment protection: safety photocells, a reversing edge, or both, depending on the operator. A custom ornamental gate doesn’t change that. In fact, a heavy custom gate on a slope needs entrapment protection tuned correctly or it reverses at the wrong time. We test the full safety circuit on every automated gate repair we do in Rocklin.
Yes, and this comes up often on Rocklin hillside properties where the intercom is wired underground from the house to the gate. We trace the wiring, match it to the new operator’s control inputs, and test the release function before we leave. If the old wiring is brittle from sun and heat exposure, we can run a fresh line. We’ll show you the plan and the price before we dig.
We set gate posts at least 36 inches deep in Rocklin, with a concrete footing that’s allowed to cure before the gate is hung. That depth gets below the zone where seasonal moisture change causes the most movement in the clay. A shallower footing will fail in two to three years in most Rocklin soils. When we do a post reset, we always bore to 36 inches, set the post in high-strength concrete, and wait for the cure before re-hanging the panel.
If your gate is dragging, grinding, or refusing to move, call (279) 266-8501. You’ll reach a live person, we’ll schedule a time that works for your family, and the price will be in writing before we touch anything. Rocklin homeowners and businesses have trusted us since 2009, and we’d like to earn that trust at your house next.
Written by Cody Beckman, Owner at Latch and Post Gate Repair, serving Rocklin since our founding in 2009.